Surgitrac

Open wire blades, screw mechanism to adjust the amount of opening of the eyelids

Speculum of steel wire

Sharp pointed tips, angled blades

Straight shafts with 4.5 mm tying platforms

Curved scissors

Sharp pointed 9.5 cm scissors

For manipulating the epitelium in lasek procedures

For manipulating the epitelium in lasek procedures

Liquid holding well for alcohol application during surgery

Blunt tipped spatula for manipulating the lasik corneal flap

Two blunt fins angled downwards and separated at a 45 angle - to mark the cornea

Open with blades, screw mechanism to adjust the amount of opening of the eyelids

Bullet shaped tip for easy insertion into the sclero-corneal tunnel

For iris retraction

Paddle shaped tip

For manipulating the intra-ocular lens

Angled nucleus chopper

Finger type nucleus chopper

Ambidextrous nucleus chopper

Curved chopper with two faceted chopping surfaces

1 into 2 teeth, 0.12 mm with tying platforms

45 angled gently curved shafts. Tip to angled length 12.0 mm used to perform continuous tear circular or oval capsulotomies

45 angled straight shafts. Tip to angled length 14.0 mm used to perform continuous tear circular or oval capsulotomies

Blunt tipped forceps for manipulating the conjuntiva

45 angled gently curved shafts. Tip to angled length 14.0 mm used to perform continuous tear circular or oval capsulotomies

12.5 m general holding forceps

Angled 45 shafts with 4.5 mm tying platforms for tying knots and also manipulation of intra-ocular lens

Straight shafts with 4.5 mm tying platforms

The Forceps grab suture needle at its tip, curved, 6 mm delicate jaw

To implant the folder intra-ocular implant into the capsular bag

Folding 5-6 mm sized optics of intra-ocular lenses (IOL). Paddle style jaws with handle stop to prevent over-folding

0.25 mm notched, with tyng platforms, 85 mm long

0.25 mm notched, with tying platforms, 85 mm long

45 angled straight shafts. Tip to angled length 14.0 mm used to perform continuous tear circular or oval capsulotomies

1 into 2 teeth, with 5.0 mm tying platforms

110 mm long

Standard tips, straight shafts with 4.5 mm tying platforms, 85 mm long

Capsulorhexis notched 45 angled tips with curved 12 mm shafts, with an iris stop, 85 mm overall length.

Straight shafts, 0.25 mm notched, very delicate, 115 mm long

1 mm spread, 0.25 mm notohod, length 115 mm long

45 angled straight shafts. Tip to angled length 14.0 mm, overall length 85 mm. Used to perform continuous tear circular or oval capsulotomies.

Incorporates tying platform tips for tucking the haptics into folded 6 mm IOL. Handle stop pin to prevent over folding IOL, 115 mm extra long

9 mm long smooth jaws, angled 45 extra delicate, 115 mm long

Fine 45 angled sharp tips with curved 12 mm shafts, afor performing capsulorhexis through tunnel incision, iris stop to prevent inadvertent iris capture. Cystostome teeth can be used to create initial flap in anterior capsule for single instrument capsulorexis procedure. 85 mm overall length

Used to perform continuous tear circular or oval capsulortomies. 12 mm 45 angled curved shafts with an iris stop. With guide pin, 105 mm long

Used to perform continuous tear circular or oval capsulortomies. 12 mm 45 angled curved shafts with an iris stop. With guide pin, 105 mm long

Round handle for finger tip rotational control. Fine 45 angled tips with curved 12 mm shafts and iris stop Round handle for iris stop. Cystostome teeth can be used to create initial flap in anterior capsule for single instrument capsulorexis procedure. With guide pin, 105 mm long

Fine 45 angled tips with shafts 12 mm with and iris stop Round handle for finger tip rotational control. Cystostome teeth can be used to create initial flap in anterior capsule for single instrument capsulorexis procedure. With guide pin, 105 mm long

Cystostome tips can be used to create initial flap in anterior capsule for single instrument capsulorhexis procedure. 45 angled 12 mm straight shafts and iris stop, 120 mm long

Curved shafts with 1 mm ring tips. 120 mm long

45 angled gently curved shafts. Tip to angled length 14.0 mm, overall length 85 mm. Used to perfrom continuous tear circular or oval capsulotomies.

Cystostome tips can be used to create initial flap in anterior capsule for single instrument capsulorhexis procedure. 45 angled 12 mm curved shafts and iris stop for performing capsulorhexis through tunnel incisions, 120 mm long

Gently curved shafts with flat tungsten carbide coated jaws. 125 mm long

Gently curved shafts with flat tungsten carbide coated jaws. 125 mm long

8 mm 45o angled shafts with smooth jaws. 115 mm long

Curved narrow smooth jaws. Very delicate, 120 mm long

Gently curved shafts with 90o angled 1.0 tips. 120 mm long

10 mm long smooth jaws. Very delicate, 108 mm long

7.5 mm long shafts. Very delicate, 108 mm long

Angled 45 shafts. With 7.5 mm long smooth jaws. 85 mm long

Fine 45 angled tips with 11 mm straight shafts and iris stop. Cystostome teeth can be used to create initial flap in anterior capsule for single instrument capsulorhexis procedure. 108 mm long

Round handle for finger tip rotational control. Iris stop to prevent inadvertant iris capture. 45 angled tips with slim 10 mm shafts to fit through phaco incision, without wound tenting. With guide pin, 105 mm long

Angled 30o narrow smooth jaws. Very delicate, 115 mm long

Swivel head with 13 mm/9 mm cut out. With blunt teeth on both sides

1 x 2 0.12 mm teeth at each tip, 115 long with a 3.0 mm spread

For fixating and retracting the globe during strabismus procedures. 1 x 2 0.5 mm teeth. Thumb activated catch for locking. The instrument feature's a unique, weighted, curved handle for stabilizing the forceps after affixing it to the globe. A suture may be placed through a hole in the end of the handle and attached to the drape for additional tracion, 118 mm long

1 x 2 0.12 mm teeth at each tip, 115 long with a 13.0 mm spread

Swivel head with 13 mm/11 mm cut out.

Swivel head, 16 mm dia.

Cannula with blunt tip and bottom port. Gently curved shaft. 23G

23G. Curved shaft with 28 cm of silicone tubing. Thin wall irrigation through main hub and aspiration through silicone tubing

Cannula irrigating vectis, dual fluid flow throughto front opening ports

U tip irrigation-aspiration cannula designed for manual removel of 12 o'clock cortex.
23G wall irrigation and aspiration lines for maximum aspiration capabilities. Irrigation through silicone tubing, aspiration through main hub

U tip irrigation-aspiration cannula designed for manual removel of 12 o'clock cortex.
23G wall irrigation and aspiration lines for maximum aspiration capabilities. Irrigation through main hub, aspiration through silicone tubing

23G. Curved shaft with 28 cm of silicone tubing. Thin wall irrigation through silicone tubing and aspiration through main hub

Titanium impregnated on posterior surface of olive tip. Fronted opening. Gently curved

Cannula with reinforced shaft. Curved 10 mm tip. 23G

Cannula with reinforced shaft. Straight 10 mm tip. 23G

Cannula with blunt tip. Straight shaft. 25G